Three waysof working
On some projects it is enough for us to find the right fixture. On others we build the lighting plan from scratch. On others still we manufacture the fixture itself around the project. Which one you start with depends on the scale of the space and the drawings you already have.
Choosing the right fixture
You have a product list or a finished lighting project; what you need is the right fixture, an alternative to consider, and the technical files.
- —Product selection from the catalogue, plus alternatives
- —Preparation of IES / LDT and DWG files
- —Equivalent-product comparison (competitor product → our match)
- —Samples and a price quotation
Building the lighting plan from scratch
You have the architecture but no lighting solution. From the lux calculation to the scene design, from fixture layout to the photometric report, we take on the whole lighting design.
- —Room-by-room lux and UGR calculation
- —Fixture layout plan and type schedule (drawn onto the DWG)
- —Lighting scenes and DALI zone plan
- —Photometric report and energy consumption calculation
- —Site visits and commissioning support
Making the fixture for the project
The standard size doesn't sit in the architecture: the run has to be 2,850 mm, the optic 12°, the body in the colour the architect chose. Because every product comes from our own tooling, this is not an exception but the normal way of working.
- —Fixture development in a bespoke length, section and optic
- —Prototype production and photometric measurement
- —Bespoke RAL / anodised surface finish
- —Mounting detail drawing (integrated into the architectural detail)
- —Series production and phased delivery to site
Comparison
The services do not exclude one another: most projects start with 01 and move to 02, some to 03.
If you don't knowwhich one it is
Send whatever you have — a floor plan, a sketch, a photo of the space, or just the square metres. We'll tell you which service to start with.